Switches and contacts for 230V
Breakers and switches, that are rated and intended for 230V.
We do not recommend that you use these switches if you do not have experience with 230V installations.
A nice switch with a rubber-cap that is waterproof (IP65). The switch is available as on/off button and as a push-on button.
A simple switch that can be activated when a door or drawer is being opened. To be mounted under a shelf or on a wall.
Switch with various functions, in black or in white plastic. It can be used for 12V, 24V and 230V. Panel-mounted in 21mm hole.
A simple waterproof 1-pole switch that can be used for 12V, 24V and 230V. A rubber-cape seals the switch when it has been panel-mounted.
A simple switch that can be mounted on a wire for example - the wire of a lamp.
A switch that is triggered by a pull of the string. It is typically used in cabinets, closets and places with recessed light. 25cm cord included.
Relay-control for 230V with 3 built-in functions. One output that can be used for 230V or lower voltage.
Breaker that shuts off when there is too much current running through, from overconsumption or a short. 5A, 10A and 16A
A timer relay from 12V to 230V with 10 different functions that can be used for time-control and automatics. Time-interval from 0.1s to 10 days.
A simple latching relay that change setting on pulse in the input. It is typically used for controlling a relay from multiple switches.
A simple adjustable relay with a delay for turning the relay off, from ½ minute to 20 minutes. A built-in switch to turn the light on or off manually.
Standard relay with one pole, for mounting on DIN rail. Available for 12V, 24V and 230V AC / DC input.
Relay with temperature sensor, that activates depending on measured and set temperature, function and hysteresis.