Matronics Dual Color - US light controller

    Controller that makes it possible to use our Dual Color emitters as US lights, where the light changes color from white to yellow for indication. Can only be used for emitters with polarity flip.

    The primary color (typically white or red) will light as standard, until the indicators are activated. The color then changes (typically to yellow), and will turn on and off together with the indicators. If there is no indication for 1 seconds, the light will change back to the primary again.

    The controller also makes it possible to use the secondary color for strobe lights, when combined with a strobe controller.

    Connecting it is very simple, where you just have to connect the following lugs

    • In+: Input plus
    • In- : Input minus
    • Out1: Output plus
    • Out2: Output minus
    • Blink: Indicator signal

    Controller that makes it possible to use our Dual Color emitters as US lights, where the light changes color from white to yellow as indicator.

    Vis fuld beskrivelse


    Pick voltage

     
     

    Datasheet

    Download datasheet

    has been put in basket


    Fetching related products...