Matronics Beam and wigwag controller, 10-30V

The Matronics Beam Controller is a robust 8-channel light controller for 10–30V systems, designed for controlling high beams and WIG-WAG/strobe functions on vehicles. It provides a sharp, professional lighting appearance with fast response, stable timing and simple setup. It solves the issue of ensuring that all lights cannot be switched on at the same time, while also providing additional functions and configuration options.

Groups

The controller handles high beams in 2 groups and can simultaneously control them as warning lights / WIG-WAG using multiple flash patterns.

Typically, channels 1 and 2 are used for roof-mounted high beams – right and left – while channels 3 and 4 are used for high beams mounted on the front or grille area – right and left.

Channels 5–8 form two additional groups that are not activated together with the high beams, but can be connected to additional lights that should operate together with the WIG-WAG function.

Please note that the high-beam lights must be connected through power relays, which are then connected to the controller.

Connection

The unit is designed for quick and straightforward installation.

• Supply voltage: 10–30V DC
• Inputs: 4 control inputs for high-beam groups and strobe functions
• Outputs: 8 channels for light outputs
• Setup: DIP switches for selecting flash pattern and speed factor

Practical advantages:

• Easy electrical integration into existing vehicle systems
• Quick commissioning without advanced programming
• Configuration can be changed directly on the unit using the DIP switches

Patterns

The controller supports these 8 flash patterns:

• Double WIG-WAG
• Single WIG-WAG
• Triple WIG-WAG
• Quintuple WIG-WAG
• Running light forward
• Running light backward
• Centre out
• Outside in