Matronics LED lamp for Scania interior light

RGB lamps

This model is connected to a 24V RGB controller, that then controls the colors. This could be a controller already mounted in the truck, or a new controller, such as Mi-Light RGB controller.

Mounting

The old lamps snap out, the plug is removed. It will be necessary to use pliers to remove the plug, as there are locks on the sides. 

The new lamp is clicked in to place. Connected the cables to a RGB controller

Single color lamps

The original lights have two different brightness levels depending on their location. Our single color light source is 2 to 4 times more powerful than the originals.  They are a direct replacement, and has the same connector on the backside.

The brightness can be adjusted by turning on of off the little DIP switch on the backside, allowing you to choose between 1 or 3 active LEDs.

Mounting

As the single color lamps use original connectors, they are super easy to install. The old lamps snap out, the plug is removed and inserted into the new lamp, which then clicks into place.

It will be necessary to use pliers to remove the plug, as there are locks on the sides.

The RGB model only has to be connected to a RGB controller