Remote controlled motorcontroller - 433MHz

    Pre-connected 2-channel relay, ready for connecting a motor. The controller makes it possible to control the direction - back and forth with a 2-button remote. It is especially practical for actuators.

    Functions

    There is a jumper inside the relay, that can be placed in three ways (left, right or no jumper). It is the placement of this jumper that decides in what way the relay operates. 

    The controller has 3 functions, but you will typically only use the momentary or the latch-function, the last function is not practical. With the momentary the motor will only run while you push a button down on the remote. With the latch mode the motor will run in one or the other direction, and you will not be able to turn it off again.

    Connecting

    Red wire: Plus

    Black wire: Minus

    Blue wires: Motor plus and minus

    If the motor runs opposite of what you expect, swap the two blue wires.

    Learn-button

    The learn-button is used to register the ID of the remote in the controller. When you push the learn-button - a yellow LED will turn on, afterwards you can push the wanted button on the remote. The LED will flash and the ID has been saved.

    To reset the controller, simply push and hold the learn button until the LED flashes.

    Electronic remote

    The electonic remote is used when you want to transmit signals to a reciving relay with other electronics, eg. with a timer, switch relay or similar. The remote is for 12V systems only. We recommend that one has experience working with electronics before using this.


    Connected 2-channel relay, ready for connecting a motor. Makes it possible to control the direction - back and forth with a 2-button remote.

    Vis fuld beskrivelse


    Pick

     
     
     
     

    Datasheet

    Download datasheet

    Related

    One workday for delivery

    Linear actuator, 500N / 50kg

    Compact and economic linear actuator for smaller projects, where it can be used for numerous purposes. Connects to 12V DC or 24V. DC

    DKK 399,00
    One workday for delivery

    DC gear motor, 12V

    Small but powerful geared DC motor for 12V. Available with different speeds (RPM) and torque.

    DKK 130,00

    has been put in basket


    Fetching related products...