Incredible small gear-motor, type N20, that is only 10x12x24mm, with a 20mm long axle and Ø3. The motor is available with RPM from 100 to 1000.
There are some accessories for this motor. First is a coupling that fits the axle of the motor, and is fastened with a pinol screw. The coupling has 4 holes for fastening a part to the motor.
The small bracket is placed over the motor and fastened with screws or bolts.
The motor is connected by soldering wires to the small solder-tabs on the back. It is possible to purcase "Soldering of 50cm wire", where we presolder 50cm 0.5mm2 wires on it, so that it is ready for use.
Facts for Motor, 100 RPM
| Free-run RPM : | 100 |
| Gearing: | 1:298 |
| Stall current: | 150mA |
| Stall current: | 16kg/cm |
| Voltage: | 6-12V |
Facts for Motor, 300 RPM
| Free-run RPM : | 300 |
| Gearing: | 1:100 |
| Stall current: | 300mA |
| Stall current: | 4kg/cm |
| Voltage: | 6-12V |
Facts for Motor, 1000 RPM
| Free-run RPM : | 1000 |
| Gearing: | 1:30 |
| Stall current: | 200mA |
| Stall current: | 2.4kg/cm |
| Voltage: | 6-12V |
Facts for Accessory, Motor coupling Ø22, 3mm
Facts for Accessory, Bracket
Facts for Service, Soldering of 50cm wire
Incredible small gear-motor, type N20, that is only 10x12x24mm, with a 20mm axle. From 100 to 1000 RPM.
Vis fuld beskrivelse
