Lamp parts and sockets
Lamp parts and sockets for 230V and 12V bulbs, which you can use to make your own lamps, or to change the sockets in existing lamps.
A socket for E14 bulbs. The socket is easily taken apart, where after you can use the screw-terminals to connect a cable.
A socket for E27 bulbs. The socket is easily taken apart, where after you can use the screw-terminals to connect a cable.
A loose socket to suit most types of 12V halogen bulbs with pin sockets. ØxL - 28x15mm.
G9 socket in ceramics with premounted wires. Easily mounted with 2 screws in the base of the socket.
A socket for G9 bulbs. The cables are put in to the holes in the base, where after the cover is clicked on.
A loose socket for GU10 bulbs. An easy fastening with 2 screws. ØxL: 28x15mm
A simple canopy in plastic for hiding the lamp fitting or the cable mount on the ceiling. It is available in white or black.
A strain-relief that is screwed on to the end of the sockets, so that the wires in the screw-terminals have no strain.
A plastic nut that fits in a G9 base. It can, for example be used for mounting the base in a hole or for a lamp screen.
A hollow threaded pipe that is used for bulb sockets with M10 thread. The socket can be fastened with the thread and the wire can be feeded through.
A nut that is intended for pipes with M10 threads, where they are used to secure pipes mounted in to bulb-sockets.
HIgh quality BA15 base, for mounting in 26mm hole. Gasket for waterproof sealing against the lamp.
A mounting metal socket and a double screw terminal to match BA15s bulbs.
Base for BAY15D bulbs, with wires for connection. Gasket secures a waterproof joint in a 26mm hole.
A simple socket in metal that fits BA15s bulbs. It can be used to convert an existing lamp or to make your own lamp.
A socket for BAY15D bulbs, where there are two pins on the bottom and the taps on the side are shifted.
A black socket in plastic that fits BA9s bulbs. The cable lugs on the bottom makes it easy to connect.
W5W socket made of rubber, that is pushed in to a fitting 12mm hole. The rubber closes around the hole and the bulb.
A black socket in plastic for W3W, W5W and T10 bulbs. It has cable-lugs on the bottom for connecting it to power.
Smart bulb adapter with wires that make it possible to use the power from various bulb fittings.
Various adapters that can be used for convert a socket-type to a different socket
Special GU10 to G4 adapter. Only for 12~24V
A special E14 to G4 adapter, which is typically used in the process of LED conversions in campingvogns, boats and other vehicles.
A special E27 to G4 adapter, which is typically used in the process of 12V LED conversions in campingvogns, boats and other vehicles.
An adapter that is used for converting a GU10 base to a E14 base, so that you can screw on E14 bulbs in the lamp.
An adapter converting E27 socket to GU10 socket, so that you can screw GU10 bulbs in to a E27 lamp.
An adapter converting E27 socket to E14 socket, so that you can screw E14 bulbs in to E27 sockets.
A simple adapter with GU10 base that fits in to a GU10 socket, so that you can screw on a E27 bulb.
1,5 meter cable with a 230V plug that can be used for connecting lamp sockets or power supplies.
A white or black cable with a premounted 230V plug anda toggle breaker. The cable is 1.5 metres long and can be used for lamps.