Lighting control for 230V

Waterproof PIR sensor, that can be used outdoors, and eg. bathrooms. Very compact housing.

An outdoor motion-sensor that is IP44, thus usable for outdoor. An adjustable light sensor and a time delay.

A nice motion-sensor for walls and ceilings. Easy to be built-in, just as a spot lamp. A timer and Lux-settings make it very flexible.

A motion-sensor that can be mounted on walls or on ceilings with screws. Adjustable sensitivity, range and delayed off.

A smart little motion sensor with a diameter of 18mm that can be mounted in a hole. There is a controller with an adjustable off delay timer.

A smart controller that turns the power on when it registers that it has become dark. With the timer you can set it up to turn off after certain hours.

Smart universal time relay for 12V or 230V, that can turn on and off on certain times and weekdays.

A simple day clock for outdoor mounting with a space for a 230V plug with a ground. A 15 minutters interval.

A simple mechanical day clock with 30 minutes intervals. For plugs with no ground. Max 3600W.

A day clock with an easy mechanical setup. There are 30 minuttes intervals in the setup. Up to 3680W power.

A timer relay from 12V to 230V with 10 different functions that can be used for time-control and automatics. Time-interval from 0.1s to 10 days.

A simple adjustable relay with a delay for turning the relay off, from ½ minute to 20 minutes. A built-in switch to turn the light on or off manually.

Relay with temperature sensor, that activates depending on measured and set temperature, function and hysteresis.

A simple latching relay that change setting on pulse in the input. It is typically used for controlling a relay from multiple switches.

Relay-control for 230V with 3 built-in functions. One output that can be used for 230V or lower voltage.