Connectors and plugs
We have a large selection of TI / Tyco AMP Superseal 1.5 connectors, that makes it easy and safe to connect lamps, lights and other electric parts to power.
Solid male and female trailer plugs in aluminium with 7 pins. The wires are easily connected with screw terminals.
Box that is fixed or mounted temporary on your trailer with LED lamps. Built in resistors remove the most CANBUS errors on your car.
A strong cable intended for trailers (ISO 1724). The cable is resistant to UV, oils and chemicals.
A complete harness for 12V and 24V with a relay, a switch, a connector to the lamp and battery-terminals. Used for easy connection.
A cable with AMP Superseal 1.5 plug with female terminals that is typically used in cars and trucks. The cable is 1.5mm² (max 15A).
A cable with AMP Superseal 1.5, male terminals that are typically mounted on lamps that need a power supply.
A cable with AMP Superseal 1.5 male and female plug in each end. The cable is 1.5mm² (max 15A).
A simple splitter with a 2-wires cable and Superseal 1.5 plugs. It can be used to connect multiple lamps to one wiring harness.
A completely assembled 1-6 pole Superseal connector with a 30cm wire on each pin.
A complete sets for male and female Superseal 1.5. Choose between plugs that consists of housings, terminals, wire-seals.
A high quality crimping tool for Superseal 1.5 terminals with 2 sets of interchangeable press jaws / bets.
A crimp tool and 2 set jaws, as well as Superseal parts for 1 to 6 pin connectors, both male and female. 339 parts.
A loose male and a female Deutsch connector for mounting on a cable. All parts included, as well as two pins for 1.5mm² wires that are crimped.
Simple splitter for Deutsch DT connectors. You get two outputs form one input, eg. for connecting two lamps from the same harness.
High quality crimping tool for Deutsch DT terminals. 2 set replacable jaws is included, contained in a solid toolbox.
Loose plastic housing, terminals and lock for assembling a complete waterproof Deutsch ATP connector. From 1.5 to 2.5mm2 cables.
The waterproof ATP connectors are read to use with 30 or 300cm cable. Typically used where there is a high current.
Splitter with ATP connectors on the input and 2 outputs. Makes it possible to connect two lamps to same connector.