Connectors and accessories for 24V
A complete harness for 12V and 24V with a relay, a switch, a connector to the lamp and battery-terminals. Used for easy connection.
A complete sets for male and female Superseal 1.5 plugs that consists of housings, terminals, wire-seals and rubber boots.
A cable with AMP Superseal 1.5 male and female plug in each end. The cable is 1.5mm² (max 15A).
A simple splitter with a 2-wires cable and Superseal 1.5 plugs. It can be used to connect multiple lamps to one wiring harness.
A cable with AMP Superseal 1.5, male terminals that are typically mounted on lamps that need a power supply.
A cable with AMP Superseal 1.5 plug with female terminals that is typically used in cars and trucks. The cable is 1.5mm² (max 15A).
A completely assembled 1-6 pole Superseal connector with a 30cm wire on each pin.
A crimp tool and 2 set jaws, as well as Superseal parts for 1 to 6 pin connectors, both male and female. 339 parts.
A high quality crimping tool for Superseal 1.5 terminals with 2 sets of interchangeable press jaws / bets.
A loose male and a female Deutsch connector for mounting on a cable. All parts included, as well as two pins for 1.5mm² wires that are crimped.
Simple splitter for Deutsch DT connectors. You get two outputs form one input, eg. for connecting two lamps from the same harness.
Splitter with ATP connectors on the input and 2 outputs. Makes it possible to connect two lamps to same connector.
The waterproof ATP connectors are read to use with 30 or 300cm cable. Typically used where there is a high current.