Remote controlled motorcontroller ready for connecting a motor. The controller makes it possible to control the direction - back, forth and stop with the supplied remotecontrol. It is especially practical for actuators.
Functions
There is a jumper inside the relay, that can be placed in three ways. It is the placement of this jumper that decides in what way the relay operates.
A: left (Momentary-function):
You will typically only use the momentary. With the momentary the motor will only run while you push a button down on the remote.
B: middle (Latch-function):
With the latch-function the motor will run in one or the other direction, and you will be able to turn it off again on the stop-button.
C: right (Periodic-function):
with the periodic the motor will run in one or the other direction and will turn off itself after about 1 second.
Connecting
Red wire: Plus
Black wire: Minus
Blue and brown wires: Motor supplement
If the motor runs opposite of what you expect, swap the blue and brown wire.
Learn-button
The learn-button is used to register the buttons on the remote in the controller.
To register a button to each of the three functions - up, down and stop - you will have to push the learn button 1,2 or 3 times, before pushing the equivalent button on the remote.
When a code is received, the conttroller will flash three times.
To reset the controller, simply push and hold the learn button until the LED flashes.
Facts
Frequency: | 315MHz, 433MHz |
Max consumption: | 60W |
Remote Control Distance: | ≈10m |
Voltage: | 12V / 24V DC |
Work temperature: | -10°C til +60°C |
Remote controlled motorcontroller ready for connecting a motor. Makes it possible to control the direction - back, forth and stop with the supplied remotecontrol.
Vis fuld beskrivelse