K11321

Motors

Small and large DC motors and controllers for these. Can be used for automatics and smaller projects.

Read more

It is important that motors and actuators are not overloaded, as this will overheat at ruin the motors. Do not connect them to a higher voltage than rated.

Notice the lever principle, when you mount the actuator. Read more about this on the next tab.

The lever principle is very easy when first learned. Below is an example of on actuator, lifting 10kg weight. Due to the difference between force arm and load arm, the actuator is actually loaded with 30kg, as the load arm is 3 times as long as the force arm.

If you would want a lower load on the actuator, you would have to extend the force arm (or move the pivot point). This also means the actuator has to move longer, and that this longer motion will take longer time. 

If you upgrade to a stronger actuator, you could shorten the force arm, and thus increase the speed of motion. 

Large actuators 

One workday for delivery

Linear actuator, 500N / 50kg

Compact and economic linear actuator for smaller projects, where it can be used for numerous purposes. Connects to 12V DC or 24V. DC

DKK 399,00
One workday for delivery

Bracket for 500N linear actuator

Standard brackets for linear actuators, for mounting on wall, ceiling and similar. Can be used in both ends of the actuator.

DKK 39,00
One workday for delivery

Heavy duty Linear actuator 2000N / 200kg

Compact and economic linear actuator for the bigger projects, where it can be used for numerous purposes. Connects to 12V or 24V.

DKK 585,00
One workday for delivery

Bracket-set for 2000N heavy duty linear actuator

Strong bracket-set for the large heavy duty actuator. 2 brackets are included, with cotter pin and bolt.

DKK 59,00
Info

Mini actuator 

One workday for delivery

Mini linear actuator, 96N / 9,6kg

Small, compact, and economic linear actuator for the very small projects, where it can be used for numerous purposes. Connects to 12V.

DKK 319,00

Gear motors 

One workday for delivery

Mini DC gear motor, 12V

Incredible small gear-motor, type N20, that is only 10x12x24mm, with a 20mm axle. From 100 to 1000 RPM.

DKK 45,00
One workday for delivery

DC gear motor, 12V

Small but powerful geared DC motor for 12V. Available with different speeds (RPM) and torque.

DKK 130,00

Pumps 

One workday for delivery

Mini waterpump motor - 3-4.5V (100L / time)

Compact immersion water pump, that can pump up to 100 litres per hour. Perfect for small pump-tasks.

DKK 59,00
Info

Motor controllers and harnesses 

One workday for delivery

Remote controlled motorcontroller - 433MHz

Connected 2-channel relay, ready for connecting a motor. Makes it possible to control the direction - back and forth with a 2-button remote.

DKK 249,00
One workday for delivery

Aktuator and motor wiring harness

Wiring hardness with switch for driving DC motor and actuator back and forth. 1 meter cable on input and output.

DKK 99,00
One workday for delivery

Regulator for DC motor, PWM - 10-30V, 3A

Compact speed regulator / motor controller for DC motors. Can be used for seperate DC motors, gear motors, actuators etc.

DKK 99,00
Info
One workday for delivery

Motor controller, dual H-bridge L298, 7-24V DC, 2A

Simple and effective motor controller for 1 or 2 DC motors. Simple control of the direction of the motor.

DKK 109,00
Info
One workday for delivery

Motor speed controller - 3V - 15V, 5A

Extra compact PWM regulator for controlling the speed of a DC motor. Easy to mount in a panel, or hide in a enclosure.

DKK 35,00
Info
One workday for delivery

Motor speed controller - 12v-40v, 10a

Motor-controller for small and large motors, with max 10A. Easy adjustment of speed with the dial.

DKK 69,00
Info
One workday for delivery

Overcurrent protection - 6V - 28V DC 10A

Protection against high current, that can be used for motors, actuators and other similar current-variable units.

DKK 99,00
Info

Mounting-accessories 

One workday for delivery

Motor coupling Ø22

Simple coupling for DC motors, stepper motors and similar, that can be used for fastening a part to its shaft.

DKK 25,00

has been put in basket


Fetching related products...