Wireless Relay System - 1 channel

    Remotes are bought seperatly

    A wireless relay-controller for 12V or 24V with a 1-channel / output,  433mhz. The 3 built-in functions give you many possibilities.

    The controller has a learn-function, so that you can register multiple remotes to the same controller. It is possible, for example to have multiple remotes for one controller, but also possible to have the same remote for multiple controllers - max 8 can be programmed at the same time.

    Remotes are bought seperatly

    Standard and protected remotes are ready for use, as a 23A (standard remote) 27A (protected remote) battery is already mounted. You can easily change the battery when this is needed. The elegant remote uses 2 x AAA batteries, not included.

    Functions

    There is a jumper inside the relay, that can be placed in three ways (left, right or no jumper). It is the placement of this jumper that decides in what way the relay operates. The three functions can be seen below:

    Toggle: Push button A for turning on, push A again for turning off.

    Latch: Push button A for turning on, push B for turning on.

    Momentary / push-on: Only on when button A is pushed down.

    Learn-button

    The learn-button is used to register the ID of the remote in the controller. When you push the learn-button - a yellow LED will turn on, afterwards you can push the wanted button on the remote. The LED will flash and the ID has been saved.

    To reset the controller, simply push and hold the learn button until the LED flashes.

    Connecting

    Each relay output is marked with A and C, while the relay input is marked with B.

    Using normal relay designations, A is "NO" (normally open) while C is "NC" (normally closed). You can use the two outputs to get power when the relay is off or when the relay is on. You can also use both.

    Electronic remote

    The electonic remote is used when you want to transmit signals to a reciving relay with other electronics, eg. with a timer, switch relay or similar. The remote is for 12V systems only. We recommend that one has experience working with electronics before using this.


    A wireless relay-controller for 12V or 24V with a 1-channel / output. Remotes are bought seperatly The 3 built-in functions give you many possibilities.

    Vis fuld beskrivelse



    Relaterede kategorier

    Transformers, power supplies and inverters


    Pick type

    Receiver
     
     
    Remote
     
     
     
     
     

    Datasheet

    Download datasheet

    Related

    One workday for delivery

    Wireless Relay System - 4 channels - 433mhz

    A relay-controller for 12V or 24V with 4 channels, which are set by a wirless remote. Remote control has to ordered separatly The 3 built-in functions give you many possibilities.

    DKK 225,00

    has been put in basket


    Fetching related products...