A nice and sturdy LED rear lamp with 30 LEDs in three models. The lamp is available in three models:
- Tail lamp with tail lights, brake lights and turn signals
- Tail lamp with reverse lights
- Tail lamp with fog lights
All models also have a reflex in the middle of the lamp.
The lamp is very sturdy, which is also why it has a 5-years waranty from the manufacturer. The hardened acrylic glass secures the lamp against shocks and impacts. It is also very resistant to chemicals and it has extra UV protection.
The electronics in the lamp are completely potted and the housing is IP67. Because of this, it can be fully submerged without problems, for example on a boat trailer.
The lamps are of course ECE-approved and EMC-approved.
Reference: MaXilamp 1XCE, 1XCW, 1XCFE
- WHITE: FRAME / -
- BROWN: DRIVING LIGHTS
- RED: BREAK LIGHTS
- YELLOW: INDICATOR LIGHTS
Keep in mind that on newer cars there may be challenges if you change your old tail lights to LED tail lights.
The lower power consumption may cause the car to believe that the bulbs are defect or the car will cause the lights to flash.
In some cases, this problem can be cached at an authorized workshop, but you may also need to use interference resistors on the features that the car is failing.
Keep in mind that on newer cars there may be challenges if you change your old tail lights to LED tail lights.
The lower power consumption may cause the car to believe that the bulbs are defect or the car will cause the lights to flash.
In some cases, this problem can be cached at an authorized workshop, but you may also need to use interference resistors on the features that the car is failing.
Keep in mind that on newer cars there may be challenges if you change your old tail lights to LED tail lights.
The lower power consumption may cause the car to believe that the bulbs are defect or the car will cause the lights to flash.
In some cases, this problem can be cached at an authorized workshop, but you may also need to use interference resistors on the features that the car is failing.
Facts for Rear, brake & indicator
| Cable: | 20cm |
| Max current (13,8V): | 1,31A |
| Voltage: | 12V / 24V |
Facts for Reverse light
| Cable: | 20cm |
| Max current (13,8V): | 1,31A |
| Voltage: | 12V / 24V |
Facts for Fog light
| Cable: | 20cm |
| Max current (13,8V): | 1,31A |
| Voltage: | 12V / 24V |
A nice and sturdy LED rear lamp with 30 LEDs in three models. A solid construction and with a 5-years waranty from the manufacturer. ECE-approved.
Vis fuld beskrivelse
