Matronics Interior Lightbar

    A fully assembled lightbar, mounted LED stripe and a 3metres wire. The front and the end caps have a very high qualtity and combined, they give a very nice look and a clear design. The hidden mounting-brackets give you a nice finish when mounted. The frosted front only minimally reduces the light output, but gives you a nice light scattering and removes the glaring effect produced by the LED stripe.

    All the available LED stripes for this profile is with 120 LEDs per meter, which gives a even light in the whole length of the profiles.

    DON'T FORGET THE CHOOSE, IF THE LED STRIPS IS FOR 12V OG 24V AND ALSO WHICH TYPE / COLOR THE LED STRIPS!

    The profiles can be used anywhere, as long as they are not exposed to water and moisture. They can be used both in your house and in your car, but you will need a transformator.

    Standard light bars

    They are available in 6 lengths that all have 3-metres wires and has a voltage of ether 12V or 24V. Mounting-clips are included and they can simply be screwed on. The profile is then clicked over the profile.

    2 clips are included for 50cm and 100cm profiles, 4 clips for 150cm and 200cm profiles, and 6 clips for 249cm and 300cm.

    Corner light bars

    The corner profile is mounted with brackets, that are intended to be mounted in the corners of ceilings and walls, with screws, bolts or rivets. We recommend that you do not use profiles longer than 1 meter when there is a lot of motion, eg. in vehicles, as they are only fastened in the ends.

    Former SKUs:

    12V: 651000 651001 651002 651003 651004 651010 651011 651012 651013 651014 651020 651021 651022 651023 651024

    24V: 652000 652001 652002 652003 652004 652010 652011 652012 652013 652020 652021 652012 652023


    A fully assembled lightbar with a bright LED stripe. Available in multiple lengths. A 3-metres wire and mounting clips included.

    Vis fuld beskrivelse


    Pick color

      Anodized
      Anodized corner
      Black
      Blac
      White

    Datasheet

    Download datasheet

    Accessories

    One workday for delivery

    Transformers with plugs - 230VAC - 12VDC

    A transformer that is ready to be plugged in. It has 12VDC on the output. It can be used to supply any kind of 12VDC product.

    DKK 99,00
    One workday for delivery

    Transformers for installation - 230VAC - 12VDC

    Non-dimmable transformers that are connected to 230VAC on the input with screw terminals and to 12VDC on the output.

    DKK 99,00

    has been put in basket


    Fetching related products...